August 27, 2019

November 10, 2018

August 21, 2017

August 12, 2017

Please reload

Recent Posts

Polar Bonding and CorrosionX

September 18, 2016

1/1
Please reload

Featured Posts

Polar Bonding and CorrosionX

September 18, 2016

 

POLAR BONDING AND HOW IT WORKS

A corrosion cell is like a tiny battery. It has an anode, cathode, electrolyte and a path of current. Eliminate any one of these ‘Corrosion Components’ and the process of corrosion stops.

 

Until the development of CORROSIONX, nearly all corrosion inhibitors were designed to prevent corrosion by placing a thick film coating of oil, wax, paint, grease, etc. over the metal surface to separate it from the atmosphere. That did not really eliminate  ‘corrosion components’. Corrosion continued to grow, under the film coating where it couldn’t be seen. CORROSIONX penetrates through existing corrosion and disrupts the corrosion process by eliminating not only one, but two of the ‘corrosion components’: 

 

It first displaces the electrolyte, then leaves an ultrathin, dielectric, barrier that blocks the path of current. Despite its high dielectric properties, (36.000 Volt!) CORROSIONX will not interfere with circuitry and will actually improve the performance of switches and circuit breakers bothered by moisture. 

CORROSIONX will not dry off but will firmly bond to the metal, lasting you for a very long time.

 

 

Share on Facebook
Please reload

Follow Us
Please reload

Search By Tags